Since your vehicle has a hitch height of 30" you will need the extensions for the Mad-Ramps Pivoting Ramp System for ATV/UTV Ramps # MR54FR, which is found on our site as the following:
- Mad-Ramps 30" Extensions for Mad-Ramps ATV/UTV Ramp System # MR66DR view full answer...
For your 1,150 pound ATV with 10" wide tires, I recommend the Erickson Arched Loading Ramps - Center Fold - Aluminum # EM07441-2. These ramps have an overall weight capacity of 1,500 pounds and measure 90" long x 12" wide. With these specifications, the ramps are perfect for loading your ATV. The ramps also come with hinges that allow you to fold that ramps in half for easy storage and transport. view full answer...
Yes, Mad-Ramps Pivoting Ramp System for ATV/UTV Ramps - 1,400-lbs # MR54FR will fit your 2019 Honda Ridgeline. It simply attaches to your 2" trailer hitch receiver and allows for safe loading of an ATV, UTV/side by side, or golf cart. The max wheel base is 88", the max width is 60", and the weight capacity is 1,400lbs. I attached a demonstration video for you to check out. view full answer...
We do offer many hitch cargo carriers with ramps, but none 48" wide. The widest cargo carrier with a ramp we offer is the 32x48 Reese Steel Solo Cargo Carrier and Folding Ramp for 2" Hitches - 400 lbs, part # PS10401-10402. This carrier is 32" wide and the length with the ramp included is 96". It has a 2" hitch and a weight capacity of 400 lbs. It is fairly heavy at 101 lbs.
If you have a pickup truck you can go with something like the Mad-Ramps Pivoting Ramp System for ATV/UTV Ramps... view full answer...
The main difference between an ATV winch and a trailer winch is that the ATV winch comes with a wiring kit and other install components that tailor it to an install on an ATV.
That being said, if you wanted to install the # SW1130220 on a trailer it would be possible. The capacity of the winch you would need will be based on the slope angle of the ramps on your trailer.
I attached a help article that details how to pick out the correct electric winch. I also attached a chart that shows... view full answer...
We do offer both the ramps and snowmobile kit you're inquiring about, the Mad-Ramps Pivoting Ramp System for ATV/UTV Ramps part # MR54FR and Snowmobile Ramp Kit part # MR69DR which is everything you need to load and secure a snowmobile in your truck bed. view full answer...
I can definitely help determine if a Mad Ramp system is right for you, but I will need some information from you first. What type of ATV or snowmobile do you intend to transport? What vehicle will you be using to transport this item? Once I have this information, I will better able to help you. view full answer...
The Topline Bed Extender, # BX4004-02, will likely interfere with ATV ramps if it is left on your tailgate. The good news is that this bed extender is easily removable. The bed extender attaches to the side brackets with two release pins. Simply remove the release pins to move the bed extender out of the way when you load your ATV. I do not recommend leaving the bed extender attached when you load your ATV.
Check out the installation video that I have attached for this bed extender. We... view full answer...
I have a solution for you. As far as the load rating of the single Stallion Loading Ramp - Steel - 48" Long x 11" Wide # 288-07474, it has a weight capacity of 800 pounds. However, when you use the ramp as a pair like the 2 that come with the # 288-07474-2, the weight capacity becomes 1,600 pounds when combined.
As far as whether we have a 60-inch Stallion ramp, the only ones we carry are the Aluminum Car Hauler Ramp Set - 60" x 14-1/2" - 6,000 lbs # 288-07502 (which only come in quantities... view full answer...
I reached out to Mad Ramps about the MAD-MOUNT Wall Mount Brackets for Mad-Ramps Pivoting ATV/UTV Ramps part # MR27DR and they informed me that the brackets are both 36" long x 2-1/2" tall. I have attached a photo below with this as well. view full answer...
U-Pack Semi Trailers have a 48" height from the ground whereas the typical application for ATV ramps like the CargoSmart Arched Loading Ramp Set # 3483070 are trailers and truck beds which are usually at most 23" inches in height. Because of this the ramps will be very steep when used on a U-Pack trailer but should allow you to get your Kawasaki Mule loaded. These ramps are rated for 3,000lbs which is almost double the curb weight of your Kawasaki Mule. They have cam-buckle straps to prevent... view full answer...
In order to carry your tractor or ATV I actually recommend the Detail K2 Mighty Multi Utility Trailer part # K2MMT4X6, not the Detail K2 Mighty Multi A-Frame Utility Trailer part # K2MMT5X7. The reason for this is because the ramp on part # K2MMT5X7 is much too steep to load a tractor or ATV. You will need one with less of an angle like part # K2MMT4X6. This trailer is actually designed for loading ATVs, UTVs, and other equipment such as your tractor.
In order to make sure the latter... view full answer...
Mad-Ramps Pivoting Ramp System for ATV/UTV Ramps # MR54FR should be able to help you haul your golf cart, but you'll want to check a couple of things first. Starting with the wheelbase, you'll want to measure from the center of the front axle back to the center of the rear axle. If your measurement exceeds 88" then your golf cart is likely going to be too long to fit. This is mostly designed for small to medium ATVs/UTVs that are 60" wide or less with only one row of seats.
You'll also... view full answer...
Erickson Arched Loading Ramp # EM07464 is sold in quantities of 1. The set of 2 is # EM07464-2. Or we have other ramp set options. I have included a link to them for you. view full answer...
Yes. The Mad-Ramps Pivoting Ramp System for ATV/UTV Ramps - 1,400-lbs - 2" Hitch # MR54FR is Mad-Ramps part number MR1400; we do not use the same part numbers as manufacturers in some cases, but the manufacturer's part number is available at the bottom of the "All Info" section. view full answer...
The Superwinch LT2000 ATV Winch - Wire Rope - Roller Fairlead - 2,000 lbs Item # 1120210 is a perfect solution for one person to move a 600lb tool box up and down a trailer ramp. It comes with a 49' cable with latched hook, pully block, D-shackle, and roller fairlead and is protected by a relay. view full answer...
We have a variety of ATV single ramps, like the Arched Loading Ramp # 288-07432, as well as ramp sets, like the Gen-Y Hitch # 325-GH-R84, that have an aluminum construction. If you can let me know what you're planning on using the ramp for I'd be more than happy to help you figure out which one we can supply you with.
I've also attached a link to our aluminum ramp options for you to filter through. view full answer...
The ignition switch wire on the Superwinch ATV winch # 1120210 requires a 12 volt connection. Basically it is designed to only let power go through the switch when the ignition is powered on. Since you are not using it on an ATV it would have to be connected directly to a constant 12 volt source. There isn't any other way unless you first ran that wire to a different switch, such as # PK34213. When off it would be as if an ATV was off. When on it would be as if the ATV was running. view full answer...
The Arched Loading Ramp Set part # EM07435 is what I recommend using for loading items into a truck bed. The ramps are lightweight at 20 lbs each and they fold for a compact storage. They also come with chains to help secure the ramps while loading. They will work with anything from big wheel ATV's to small wheel lawnmowers due to the close spacing of the horizontal supports. view full answer...
Yes, we have the Curt Trailer Hitch Receiver # C44BR which is custom fit for you 2022 Toyota Tundra that did not come with a receiver. This will allow you to be able to use the Mad-Ramps Pivoting Ramp System # MR54FR for carrying your ATV or UTV. view full answer...
Go To Results